Cart

Your Cart is Empty

Back To Shop

Cart

Your Cart is Empty

Back To Shop
Sale

RDL DS-PSP1AF Active Loudspeaker Wall Plate – Format A

Original price was: $256.00.Current price is: $76.80.

(In Stock)

SKU: DSFH325477910 Category:

The D SERIES-PSP1AF is a compact active loudspeaker that delivers rich, detailed sound in Decora-compatible wall or chassis mounts. It is a single-pair audio amplifier module compatible with RDL Format A twisted pair products. The PSP1AF receives audio and 24 Vdc power through a rear-panel RJ45 jack. A rear-panel switch set during installation determines which of the three FORMAT-A pairs is amplified. Amplification is provided by a high-efficiency Class D power stage with audio filtering tailored for crisp, pleasant audio clarity. The high-efficiency Class D output stage produces negligible heat for all levels of expected voice or music modulation. The amplified output level is set by the installer using a volume control located behind the speaker grill. The PSP1AF includes an analog compressor/limiter that makes higher average sound output levels possible without clipping.

The driver is constructed of materials found in premium larger speakers. The unique steel enclosure provides full baffling in a tightly sealed rigid structure. This produces sonic presence within an extended frequency range expected from larger speakers. Internal filtering rolls off out-of-band frequencies to reduce distortion and increase peak power capability. Dispersion covers a spherical area of nearly 180 degrees with the speaker mounted in a wall.

Models are available with grills in black (DB-PSP1AF), white (D-PSP1AF), gray (DG-PSP1AF) or stainless steel (DS-PSP1A).

Features

  • Exceptional Audio Quality for Ultra-Compact Size
  • 2 Watt RMS Audio Amplifier
  • Compressor/Limiter Prevents Clipping
  • Connects to Format-A Sender using Twisted-Pair Cable
  • Powered from RDL Twisted Pair Format-A Sender
  • Gain Set by the Installer
  • Acoustically Optimized Decora Enclosure
  • Fidelity Comparable to Larger Drivers
  • Hemispherical Dispersion Mounted In Wall or Flat Surface

Specifications

Input: RDL Format-A
Input Connection: RJ45
Format-A Signal Pair Used: Switch-selectable A, B, or C (Rear-panel)
Gain Adjustment: Single-turn audio taper (set by installer)
Maximum SPL: 81 dB
Frequency Range: 150 Hz to 20 kHz, nominal
CMRR: > 80 dB (50 Hz to 120 Hz)
Power Requirement: 24 Vdc @ 55 mA (Idle); 100 mA (maximum), Ground-referenced
Ambient Operating Environment: 0 C to 40 C Maximum; 20 C Recommended
Dimensions: Height: 4.12 in. 10.46 cm; Width: 1.72 in. 4.37 cm; Depth: 2.27 in. 5.77 cm
Package Type: Cardboard Box
Package Dimensions: 3.625 x 4.625 x 2.125 in.
Shipping Weight: .562 lbs.
WEEE weight: .423 lbs.
Tariff code: 8518.21.0000

Reviews

There are no reviews yet.

Be the first to review “RDL DS-PSP1AF Active Loudspeaker Wall Plate – Format A”

Your email address will not be published. Required fields are marked *

Cart

Your Cart is Empty

Back To Shop