Ashly SRA-2075 Rackmount Stereo Power Amplifier – 40 Watts Per Channel At 8 Ohms
Original price was: $689.00.$99.00Current price is: $99.00.
(In Stock)
Ashly SRA-2075 overview
TheAshly SRA-2075is a 2-channel convection-cooled rackmount P.A. or studio power amplifier housed in a rugged 1RU metal chassis, offering an output of 40 Watts per side at 8 Ohms, designed to drive 4 and 8 Ohm loads.
The SRA-2075 incorporates a switch-mode-power supply and Class-D amplifier circuitry, providing a power-efficient solution. The low-noise unit features a switchable HPF filter and selectable gain sensitivity, turn-on delay DIP switches with up to 8 seconds of delay available, and dual or bridge modes of operation.
The SRA-2075 is equipped with a front-panel headphone monitoring output, an internally switchable 120V/240V power supply, extensive protection circuitry, and standard Euroblock inputs along with screw terminal outputs.
1RU 9 lb. lightweight rackmount stereo power amplifier with 40 Watts per side power output at 8 OhmsSelectable Dual or Bridge Mono Operation, designed for 4- or 8-Ohm loads2-stage high-efficiency switched mode power supply with high power-to-weight ratioUltra-quiet convection-cooled operationOn-board 80Hz HPF, selectable gain sensitivityUp to 8 sec. of turn-on delay with selectable Dip Switch complementComprehensive amplifier protection circuitry includes: Output Over-current, DC Output, Main Supply Rail Over-voltage, Chassis Temperature, Inrush Limiting, Mains FuseFront Panel Indicators include: overall power, standby, and protect; per-channel clip and signal indicatorsEuroblock input connectors, Screw Terminal outputs
Ashly SRA-2075 specs
| Power Rating | Stereo @ 8 Ohms: 40W per Ch. Stereo @ 4 Ohms: 75W per Ch. Mono Bridge @ 8 Ohms: 150W |
| Damping Factor | >200, 8-Ohm load, <1kHz |
| Input Sensitivity | 1.5V |
| Input Impedance | 20 kOhms, Balanced |
| Gain | Selectable 26dB or 36dB |
| Frequency Response | 20 Hz – 20 kHz, +/-1.0dB |
| Signal-to-Noise Ratio | >98dB, 20Hz – 20kHz unweighted |
| Total Harmonic Distortion (THD) | <0.01% (8-Ohm load, 10dB below rated power, 20Hz – 10kHz |
| Input Connections | 2 x Ch.1,2 3- Pin Euroblock |
| Output Connectors | 2 x Ch.1,2 Screw Terminals 1 x 1/4″ Stereo Headphone Jack |
| Controls Front Panel | 1 Power Switch 2 x Gain Control Knobs |
| Controls (Rear) | 4 x Delay DIP Switches 2 x 80Hz HPF On/Off Button 2 x Gain Sensitivity Button 2 x Bridge/Stereo Mode Switch |
| Indicators | 1 x Blue Power On LED 1 x Yellow Standby LED 1 x Red Protect LED 2 x Red Clip LED’s 2 x Green Signal LED’s |
| Cooling | Convection-cooled |
| Power Consumption | 18.75W (1/8 Power Pink Noise @ 4 Ohm) Typical Current: Idle: 0.30A 1/8 Power: 0.69A |
| Dimensions | 19 x 1.75 x 11″ (483 x 44.5 x 279.4mm) |
| Weight | 9 lb (4.1 kg) |
| Specialties | Adjustable Turn-On delay Switches Convection Cooling Switch-Mode Power Supply |
Reviews
There are no reviews yet.