Original price was: $486.99.$98.00Current price is: $98.00.
(In Stock)
TheAshley TM-360 Public Address Mixer/Amplifieris a mono mixer/amplifier with 60 watts of power and intended for background music, paging, commercial offices, retail spaces and more. The amplifier supports 4 ohm, 25 volt, 70 volt and 100 volt operation, with taps on Euroblock connectors.
There are mic and line inputs, phantom power, and front-mounted audio input jack. Priority mute interrupts background music and all other programming in order to prioritize pages, announcements, etc. The straightforward front panel features a level control, bass and treble controls and level control dial for each of the 3 input channels.
1 x mic/line input (balanced Euroblock)2 x line/stereo inputs (balanced Euroblock, unbalanced stereo)Independent input gainPriority muteSignal presence LEDsZone 2 Output for selected inputsBass & treble controlsSelectable 400Hz low-cut filter60W Output4 Ohms (direct out)
25V Transformer Isolated (US)
70V Transformer Isolated
100V Transformer Isolated (EC, Japan)Manual or automatic power saving mode
| Power Output | 60W RMS (THD 1%) Zone 2 output: Rated power 8 (RMS, THD 3%), 1W, Balanced 600, 2.4V |
| Output Voltage | EC & Associated (230V): 4 / 15.5V, 82 / 70V, 167 / 100V USA/Canada & Associated: 4 / 15.5V, 10.4/ 25V, 82 / 70V |
| Frequency Response | Input 1, 2, 3: +1/-3dB, 80Hz – 15kHz (1W @ 1KHz) |
| THD | < 1% (60W @ 1kHz) |
| Signal-to-Noise Ratio | Input 1, 2, 3: >80dB (60W @ 1KHz, A- weighted) |
| Input Sensitivity | Input 1: -10dBV to -50dBV Input 1, 2: 0dBV to -20dBV |
| Tone Control | Treble (10kHz): +/- 10dB Bass (100Hz): +/- 10dB |
| Residual Noise | Master volume minimum: -72dB Master volume maximum: -57dB |
| Preamp Output | 0dBV (input -10dBV) |
| Switches | SW1: Zone 2 Assign Input 1 SW2: Zone 2 Assign Input 2 SW3: Zone 2 Assign Input 3 SW4: VOX Trigger Input 1 SW5: VOX Trigger Input 2 SW6: Mute Link Input 2 & 3SW8: Ch1 Phantom Power, +18V |
| Mute | Manual Mute Contact Closure: Pins 1 & G = Input 1 Mute Trigger Master System Standby Contact Closure: Pins G & 2 = Power Standby |
| Power Supply | 120VAC, 60Hz, 24W (USA & Canada and Associated) 230VAC, 50/60Hz, 24W (EC and Associated) |
| Current Draw | Standby: 0.15A Idle: 0.24A 1/8 power pink noise: 0.38A 1/3 power sine wave: 0.66A |
| Online Thermal Dissipation | Standby: 26 Idle: 43 1/8 power pink noise: 53 1/3 power sine wave: 75 |
| Temperature | 4 to 49 C (40 – 120 F) |
| Dimensions (WxHxD) | 11.4 x 3 x 7.3″ (290 x 76 x 185mm) |
| Weight | 8.6lb (3.9kg) |
Reviews
There are no reviews yet.