RTS WM-2000 2-Channel Wall Mount Wired Intercom Headset Station
Original price was: $484.00.$98.00Current price is: $98.00.
(In Stock)
TheTelex WM-1000is a professional 2-channel wall mount headset station for wired intercoms, featuring a dedicated channel select switch allowing access to either of the two available channels. The station accepts either party line or local power, and mounts in a standard double-wide type electrical outlet box.
The WM-1000 is equipped with a mic limiter circuit, back-lit control buttons for low-light operation, Talk and Listen buttons with momentary/latching operation, and monitoring volume control. The Call send button offers a call receive indicator light, and a Call receive beep tone is available with an on/off selector.
The WM-1000 also provides a dedicated Mic kill receive with on/off selection, Side Tone trim control, and quick-connect wire clamp terminals for party line wire connections. The 4-pin male XLR connector accepts headsets with balanced or unbalanced microphones, and is Clear-Com compatible.
- Wall mount headset stations for wired intercoms with Audiocom and Clear-Com compatibility
- Accepts local power supply or remote party line phantom power
- Backlit Momentary or hands-free Latching selectable listen key
- Backlit Call key for call signal send, incoming call indication
- Backlit Momentary and Latching Talk key
- Two-color green (Ch.1) and red (Ch.2) backlit front panel channel selector switch
- 4-pin XLR headset connector accepts Monaural headphones and balanced or unbalanced dynamic microphones
- Mic kill receive feature allows remote operator to turn off talk key
- Front panel volume control, internal configuration DIP switches, sidetone trim control and Audiocom/Clear-Com selector switch
Telex WM-2000Specs
| Frequency Response | 100 Hz – 20kHz |
| Gain | 35dB Adjustable Range (sidetone) |
| Microphone Input Type | 4-pin XLR Male (Headset Only) |
| Limiter | Yes, built-in |
| Power Output | 1 Vrms nominal |
| Speaker | No |
| SPL | Not Applicable |
| Signal-to-Noise Ratio | <-70dB |
| THD + N | Not Specified by Manufacturer |
| Panel Microphone Preamp | No |
| Program Amplifier | Not Specified by Manufacturer |
| Speaker Amplifier | No |
| Input Level | Not Specified by Manufacturer |
| Input Impedance | 50 – 200 Ohms(Headset Microphone) 150 – 600 Ohms(Headphones) |
| Internal Connectors | Six-position Terminal Block (screw-in wire clamps) |
| Internal Controls | 2 x Sidetone Trim 3 x Call Beep/DC Call Enable/Headset Mic Type Dip Switches 1 x Audiocom/Clearcom Selector Switch |
| Front Panel Controls and Indicators | 1 x Volume Knob 1 x Listen Button 1 x Call Button 1 x Talk Button 1 x Channel Select Switch |
| Power Requirements | Local: 12 – 15VDC, 65 to 150mA Phantom: 24VDC nominal, 65 to 150mA |
| Dimensions | Mounts in standard two-gang electrical box |
| Weight | Not Specified by Manufacturer |
Packaging Info
| Package Weight | 1.05 lb |
| Box Dimensions (LxWxH) | 6.6 x 6.3 x 4.9″ |
Reviews
There are no reviews yet.