SolidDrive SD-1 Sound Transducer for Drywall installation (Titanium)
Original price was: $548.00.$98.00Current price is: $98.00.
(In Stock)
The titaniumSD1 SolidDrive Sound Transducer for Drywall installationfromSoundTube Entertainmentutilizes dual-voice coil technology in an aluminum enclosure to transfer acoustic energy to any substrate. Symmetrically opposed neodymium magnets and specifically engineered mounting hardware results in hidden planar-source acoustics.The result is acoustical uniformity throughout the listening space.This sound transducer is designed for mounting on drywall surfaces, and comes with a direct screw aluminum mounting base and an attached wiring harness with EuroStyle connector. This transducer can be installed in-wall and in-ceiling, and patent-pending acoustic in-wall mounting brackets are needed for installation (sold separately).
The SD1 Sound Transducer is suitable for use at restaurants, mall stores, auto dealerships, department stores, stadium sky boxes, reception areas, and glass atriums.
Note: To ensure optimal listening experience, the installer must equalize the SolidDrive SD1 System. Equalization is accomplished by using the SolidDrive Drywall Passive Equalization Module (sold separately).
- Dual-voice coil technology in a durable, aluminum enclosure delivering high power handling and sensitivity across multiple substrates
- Symmetrically opposed neodymium magnets convert audio signals into acoustical energy for any rigid surface including drywall
- Hidden planar-source audio technology evenly distributes acoustic energy throughout the listening space
- Behind-surface mounting technology ensures maximum visual appeal
- SolidDrive Drywall Passive Equalization Module (sold separately) increases the transducer’s sound performance for optimal listening enjoyment by using notch filters to correct peaks in the frequency response
- For extended frequency response, couple this SolidDrive unit with SW7 or SW8 subwoofers (sold separately)
- CE, UL 1480 & 2043, and RoHS compliant
Note: This transducer is designed for drywall installation onlySpecifications
| System Type | On-surface full-range transducer |
| Impedance | Nominal: 8 ohms |
| Sensitivity | dB @ 2.83 V/1 m: 70 to 75 dB dB @ 1 W/1 m: 73.5 dB |
| Frequency Response | 70 Hz to 15 kHz @ -3 dB: 80 Hz to 10 kHz @ -10 dB: 60 Hz to 15 kHz |
| Maximum Power | Program: 50 W Continuous RMS: 30 W SPL @ 1 m: 88.5 dB |
| Recommended Amplifier Power | 10 to 100 W |
| Coverage Angle | -6 dB @ 2 kHz: 120 -6 dB @ 10 kHz: 120 |
| Enclosure | Chrome-plated aluminum |
| Inputs | Wire lead with screw connector block |
| Dimensions | 2.28 x 2.08″ (5.79 x 5.28 cm) |
| Weight | 1.20 lb (0.54 kg) |
Packaging Info
| Package Weight | 1.4 lb |
| Box Dimensions (LxWxH) | 5.5 x 5.3 x 5.3″ |
Reviews
There are no reviews yet.