Sale

Ashly TRA-2075 Rackmount Stereo Power Amplifier With 70V100V Transformer – 40 Watts Per Channel At 8 Ohms

Original price was: $996.99.Current price is: $99.00.

(In Stock)

SKU: DSFH325475597 Category:

Ashly TRA-2075 overview

TheAshly TRA-2075is a 2-channel convection-cooled rackmount P.A. or installation power amplifier housed in a rugged 2RU metal chassis, offering an output of 40 Watts per side at 8 Ohms, designed to drive 4 and 8 Ohm loads and transformer coupled 70V and 100V lines simultaneously. The coupling transformers are internally mounted.

The TRA-2075 incorporates a switch-mode-power supply and Class-D amplifier circuitry, providing a power-efficient solution. The low-noise unit features a switchable HPF filter and selectable gain sensitivity, turn-on delay DIP switches with up to 8 seconds of delay available, and rear-mounted set-and-forget gain controls.

The TRA-2075 is equipped with an internally switchable 120V/240V power supply, extensive protection circuitry, and standard Euroblock inputs along with screw terminal outputs.

2RU rackmount stereo power amplifier with 40 Watts per side power output at 8 Ohms and built-in 60W/70V transformerDesigned to simultaneously drive 4- or 8-Ohm loads and 70V/100V transformer-coupled lines2-stage high-efficiency switched mode power supply with high power-to-weight ratioUltra-quiet convection-cooled operationOn-board 80Hz HPF, selectable gain sensitivityUp to 8 sec. of turn-on delay with selectable Dip Switch complementComprehensive amplifier protection circuitry includes: Output Over-current, DC Output, Main Supply Rail Over-voltage, Chassis Temperature, Inrush Limiting, Mains FuseFront Panel Indicators include: overall power, standby, and protect; per-channel clip and signal indicatorsEuroblock input connectors, Screw Terminal outputs

Ashly TRA-2075 specs

Power Rating Stereo @ 8 Ohms: 40W per Ch.
Stereo @ 4 Ohms: 75W per Ch.
Stereo @ 70V: 75W per Ch.
Stereo @ 100V: 75W per Ch.
Damping Factor >200, 8-Ohm load, <1kHz
Input Sensitivity 1.5V
Input Impedance 20 kOhms, Balanced
Gain Selectable 26dB or 36dB
Frequency Response 20 Hz – 20 kHz, +/-1.0dB
Signal-to-Noise Ratio >98dB, 20Hz – 20kHz unweighted
Total Harmonic Distortion (THD) <0.01% (8-Ohm load, 10dB below rated power, 20Hz – 10kHz
Input Connections 2 x Ch.1,2 3- Pin Euroblock
Output Connectors 2 x Ch.1,2 Screw Terminals
Controls Front Panel 1 x Power Switch
Controls (Rear) 2 x Gain Control Knobs
4 x Delay DIP Switches
2 x 80Hz HPF On/Off Buttons
2 x Gain Sensitivity Buttons
Indicators 1 x Blue Power On LED
1 x Yellow Standby LED
1 x Red Protect LED
2 x Red Clip LED’s
6 x Green -24/-18/-12dB Signal LED’s
4 x Yellow -6/-3dB Signal LED’s
Cooling Convection-cooled
Power Consumption 18.75W (1/8 Power Pink Noise @ 4 Ohm)
Typical Current:
Idle: 0.30A
1/8 Power: 0.69A
Dimensions 19 x 3.5 x 11″ (483 x 89 x 279.4mm)
Weight 19.5 lb (8.8 kg)
Specialties Adjustable Turn-On delay Switches
Convection Cooling
Switch-Mode Power Supply

Reviews

There are no reviews yet.

Be the first to review “Ashly TRA-2075 Rackmount Stereo Power Amplifier With 70V100V Transformer – 40 Watts Per Channel At 8 Ohms”

Your email address will not be published. Required fields are marked *

9
$474.69